AlveyTech 10" x 4.50-5 PVC Plastic Tire Sleeve for Drift Trikes - Replacement Smooth Tires Shroud for Adult/Kids Drifter Trike and Drifting Go-Kart like Coleman, MotoTec, Razor, and Huffy, 1-Pack

The 10x4.50-5 PVC plastic tire sleeve for drift trikes will make your slick tires even slicker and slippier. Made from hard PVC, the replacement plastic sleeve was designed to limit the amount of rear tire traction and provide your ride with a faster drift effect. Coleman, MotoTec, Razor, and many others use the 10x4.50-5 slick tire on their dift trike models.Note: These hard PVC drift sleeves are made to fit tightly onto the tire. In order to mount easily, you should let some of the air out, then lubricate the tire with soap suds before pressing the sleeve onto the rubber. The pressing may be easier with a wood or rubber mallet. When the sleeve is in its correct position, just refill the tire with the correct air pressure. In addition, the PVC sleeve may adhere to the rubber tire better by using several strips of self-adhesive grip tape (such as used on skateboard decks) on the sleeve's inner face. Specifications Outer diameter: 9-7/8" Inner diameter: 9-1/2" Width: 5-1/4"

• 10x4.50-5 PVC Plastic Sleeve for Coleman, MotoTec, Razor, and many other drift trikes
• Made from hard PVC, the replacement plastic sleeve was designed to limit the amount of rear tire traction and provide your ride with a faster drift effect
• Note A: If these sleeves are installed on drifting carts or scooters, due to the wheels being subjected to additional forces other than just rolling forward, these sleeves will wear down at faster rates. The rougher the terrain, the faster the wear. All part of the fun!
• Note B: These hard PVC drift sleeves are made to fit tightly onto the tire
• Install: In order to mount more easily, let some of the air out, then lubricate the tire with soap suds before pressing the sleeve onto the tire. Pressing may be easier with a wood or rubber mallet. Refill with air once installed