OEM Drone Accessories Fit For Holybro Fit For SIK Telemetry Radio V3 100mW 433MH 915MHz Open-Source SIK firmware -n-Play Fit For Pixhawk Standard Flight Controllers Replaceable (Color : 915MHz) Drone

Fit For Holybro SiK Telemetry Radio V3 100mW 433MH 915MHz Open-source Fit For SiK firmware -n-play Fit For Pixhawk Standard Flight ControllersOverview 1: Fit For Holybro Fit For SiK Telemetry Radio is a small, light and inexpensive open source radio platform that typically allows ranges of better than 300m "out of the box" (the range can be extended to several kilometres with the use of a patch on the ground). 2: This radio is -n-play all Fit For Pixhawk Standard and other Flight Controller, providing the easiest ways to setup a telemetry connection between your Autopilot and a ground station. 3: It uses open source firmware which has been specially designed to work well with MAVLink packets and to be integrated with the Mission Planner, Fit For Ardupilot, Fit For QGroundControl, Fit For PX4 Autopilot. 4: The radios can be either 915Mhz or 433Mhz and you should purchase the model which is appropriate Fit For your country/region. Note: This radio does not support firmware upload via Mission Planner 1.3.75 or order. Please use Mission Planner 1.3.75.1 or newer if firmware upload is needed. Specification 100 mW maximum output power (adjustable) -117 dBm receive sensitivity Fit For RP-SMA connector 2-way full-duplex communication through adaptive Fit For TDM Fit For UART interface Transparent serial link MAVLink protocol framing Frequency Hopping Spread Spectrum (FHSS) Configurable duty cycle Error correction corrects up to 25% of bit errors Open-source Fit For SIK firmware Configurable through Mission Planner & APM Planner Fit For FT230X is a USB to BASIC UART IC Dimensions 28 x 53 x 107mm without Electrical Data Supply voltage 5V DC from USB or Fit For JST-GH) Transmit current: 100 mA at 20dBm Receive current: 25 mA Serial interface: 3.3 V UART Package Included Radio modules with antennas *2 Micro-USB to USB-A *1 Mic

• Open-source Fit For SIK firmware
• -n-play Fit For Pixhawk Standard Flight Controllers
• Easiest way to connect your Autopilot and Ground Station
• Interchangeable air and ground radio
• Micro-USB port (Type-C Adapter Included) ; 6-position Fit For JST-GH connector